diff --git a/src/main.rs b/src/main.rs
index 3574f43..fd71fcf 100644
--- a/src/main.rs
+++ b/src/main.rs
@@ -149,24 +149,6 @@ fn main() -> ! {
         curr_state: Box::new(InitATState::default()),
     };
 
-    let pull_down_cfg = InputConfig::default().with_pull(esp_hal::gpio::Pull::None);
-    let pull_up_cfg = InputConfig::default().with_pull(esp_hal::gpio::Pull::None);
-    // let mut input_1 = Output::new(peripherals.GPIO4, Level::High, OutputConfig::default());
-    // let mut input_2 = Output::new(peripherals.GPIO36, Level::High, OutputConfig::default());
-    // let mut input_3 = Output::new(peripherals.GPIO22, Level::High, OutputConfig::default());
-    // let mut input_4 = Output::new(peripherals.GPIO12, Level::High, OutputConfig::default());
-    // let mut input_5 = Output::new(peripherals.GPIO13, Level::High, OutputConfig::default());
-    // let mut input_6 = Output::new(peripherals.GPIO26, Level::High, OutputConfig::default());
-    // let mut input_7 = Output::new(peripherals.GPIO27, Level::High, OutputConfig::default());
-
-    // let input_1 = Input::new(peripherals.GPIO4, pull_up_cfg);
-    // let input_2 = Input::new(peripherals.GPIO36, pull_up_cfg);
-    // let input_3 = Input::new(peripherals.GPIO22, pull_up_cfg);
-    // let input_4 = Input::new(peripherals.GPIO12, pull_up_cfg);
-    // let input_5 = Input::new(peripherals.GPIO13, pull_up_cfg);
-    // let input_6 = Input::new(peripherals.GPIO26, pull_up_cfg);
-    // let input_7 = Input::new(peripherals.GPIO27, pull_up_cfg);
-
     static mut THREAD_2_STACK: Stack<{ 30 * 1024 }> = esp_hal::system::Stack {
         mem: MaybeUninit::new([0u8; 30 * 1024]),
     };
@@ -187,69 +169,6 @@ fn main() -> ! {
         },
     );
 
-    // let mut pin_1 = Output::new(peripherals.GPIO13, Level::Low, OutputConfig::default());
-    // let mut pin_2 = Output::new(peripherals.GPIO33, Level::High, OutputConfig::default());
-    // let mut pin_3 = Output::new(peripherals.GPIO15, Level::Low, OutputConfig::default());
-    // let mut pin_4 = Output::new(peripherals.GPIO22, Level::Low, OutputConfig::default());
-    // let mut pin_5 = Output::new(peripherals.GPIO26, Level::Low, OutputConfig::default());
-    // let mut pin_6 = Output::new(peripherals.GPIO23, Level::Low, OutputConfig::default());
-    // let mut pin_7 = Output::new(peripherals.GPIO25, Level::Low, OutputConfig::default());
-
-    // // let mut pins = [pin_1, pin_2, pin_3, pin_4, pin_5, pin_6, pin_7];
-    // let delay = Delay::new();
-
-    // loop {
-    //     pin_3.set_low();
-    //     delay.delay_millis(300);
-    //     pin_3.set_high();
-    //     delay.delay_millis(300);
-    // }
-
-    // let pin_1 = Input::new(
-    //     peripherals.GPIO13,
-    //     InputConfig::default().with_pull(esp_hal::gpio::Pull::Up),
-    // );
-    // let mut pin_2 = Output::new(peripherals.GPIO33, Level::High, OutputConfig::default());
-    // let pin_3 = Input::new(
-    //     peripherals.GPIO15,
-    //     InputConfig::default().with_pull(esp_hal::gpio::Pull::Up),
-    // );
-    // let mut pin_4 = Output::new(peripherals.GPIO22, Level::High, OutputConfig::default());
-    // let pin_5 = Input::new(
-    //     peripherals.GPIO26,
-    //     InputConfig::default().with_pull(esp_hal::gpio::Pull::Up),
-    // );
-    // let mut pin_6 = Output::new(peripherals.GPIO23, Level::High, OutputConfig::default());
-    // let mut pin_7 = Output::new(peripherals.GPIO25, Level::High, OutputConfig::default());
-
-    // let col_pins = [pin_3, pin_1, pin_5];
-    // let mut row_pins = [pin_2, pin_7, pin_6, pin_4];
-    // let keypad = [
-    //     ['1', '2', '3'],
-    //     ['4', '5', '6'],
-    //     ['7', '8', '9'],
-    //     ['*', '0', '#'],
-    // ];
-
-    // let delay = Delay::new();
-
-    // loop {
-    //     delay.delay_millis(100);
-    //     for row in 0..4usize {
-    //         row_pins[row].set_low();
-    //         delay.delay_millis(10);
-    //         for col in 0..3usize {
-    //             if col_pins[col].is_low() {
-    //                 log::info!("Key: {}", keypad[row][col]);
-    //             }
-    //         }
-    //         row_pins[row].set_high();
-    //         delay.delay_millis(10);
-    //     }
-    //     state_mgr.update();
-    //     state_mgr.draw();
-    // }
-
     loop {
         state_mgr.update();
         state_mgr.draw();