Add Book of Reid

documentation/README.md

@@ -12,6 +12,12 @@ syntax-highlighted with Rust, because it's close enough.
 Reid has a standard library that is referred to as `std` in code. Documentation
 about importable types and functions can be found [here](./standard_library.md).
 
+## Book
+
+A collection of documentation and examples to get you going can be found at [the
+Book of Reid](./book.md). It is recommended you read through the chapter about
+Syntax first though to familiarize yourself with the basic concepts of Reid.
+
 ## Syntax and general information
 
 Syntax for Reid is very much inspired by rust, and examples of the language can

documentation/book.md

@@ -0,0 +1,122 @@
+# Book of Reid
+
+Welcome to the Book of Reid, a learning resource for Reid programming language.
+This is neither just documentation or a tutorial, but something in between,
+trying to establish basic concepts and philosophies.
+
+Before reading this book, it is recommended you familiarize yourself with [the
+Syntax of Reid](./README.md#syntax-and-general-information). After you're
+familiar with that, you can continue here.
+
+The best way to think about Reid is to think about how a combination of Rust's
+Syntax and C's closeness to hardware would manifest itself in a language. Reid
+is a very grounded language with not many safety features in reality, while
+still trying to have some. Reid also has error raporting vastly superior to that
+of C, similar to Rust.
+
+Reid also, similarly to Rust, has a powerful typechecker that can infer types
+automatically quite well. When this does not pan out, you can often coerce types
+either in literals by adding a type after it (e.g. `5u32`), similarly to rust,
+or simply casting the value (e.g. `5 as u32`).
+
+## Table of Contents:
+- [Hello World](#hello-world)
+- [Borrowing and Pointers](#borrowing-and-pointers)
+
+### Hello World
+
+A hello world in Reid looks something like this:
+
+```rust
+import std::print;
+import std::from_str;
+import std::free_string;
+
+fn main() {
+    let message = from_str("hello world");
+    print(message);
+    free_string(&message);
+}
+```
+
+Let's go through this example line-by-line:
+
+```rust
+import std::print;
+import std::from_str;
+import std::free_string;
+```
+
+Tthe first 3 lines are simply imports from the [Standard
+Library](./standard_library.md) to functions `print`, `from_str` and
+`free_string`, which are used later in this example.
+
+```rust
+fn main() {
+    ...
+}
+```
+
+Then we declare our `main`-function. The function that gets executed after
+compilation is always called `main`, and it can return a value, although it does
+not necessarily have to. The return code of the program ends up being the return
+value of `main`, and without a return value it may be unpredictable. In this
+example we don't declare a return value for `main`.
+
+```rust
+    let message = from_str("hello world");
+```
+
+Then we create our printable message with `from_str` and store it in variable
+`message`. While this value could be passed to `print` directly, it is necessary
+to store the value first in order to free it. Let's come back to that.
+
+
+```rust
+    print(message);
+```
+
+Here we actually print out the message we just created, very simple.
+
+```rust
+    free_string(&message);
+```
+
+Finally we free the string. Like mentioned before, it is necessary to store the
+value in a variable so that the memory allocated for the message can be free.
+While freeing the memory is not strictly necessary, it is recommended,
+especially if the program runs for longer than this example.
+
+That's the Hello World of Reid! It is not a oneliner, but at least I'd say it is quite simple in the end!
+
+### Borrowing and Pointers
+
+In Reid, all **variables** can be borrowed, and borrows can be dereferenced.
+Borrows act like pointers, except that borrows do not have the same implicit
+safety-problem as pointers, because Borrows are not implicitly unsized. With
+pointers, the size of the allocated memory is unknown at compile time, which
+makes them unsafe in comparisons.
+
+Note though how **variables** were bolded; You can not make borrows out of just any expressions, they must first be stored in variables. A simple example using borrows would be:
+```rust
+fn main() -> u32 {
+    // Create a value to be mutated
+    let mut value = [4, 3, 2];
+
+    // Pass a mutable borrow of the value
+    mutate(&mut value);
+
+    // Retrieve the now-mutated value
+    return value[1];
+}
+
+fn mutate(value: &mut [u32; 3]) {
+    // Dereference the borrow to mutate it
+    *value[1] = 17;
+}
+```
+
+This example will always return `17`. Notice also, how a **mutable** borrow was
+passed to `mutate`-function. While borrows do not always need to be mutable,
+this example would not work without the `mut`-keyword. Try it out for yourself
+to see why!

examples/borrow.reid

@@ -1,11 +1,15 @@
-// Arithmetic, function calls and imports!
-
-
 fn main() -> u32 {
-  let mut value = [4, 3, 2];
+    // Create a value to be mutated
+    let mut value = [4, 3, 2];
 
-  let mut borrow = &mut value;
-  (*borrow)[1] = 17;
+    // Pass a mutable borrow of the value
+    mutate(&mut value);
 
-  return value[1];
+    // Retrieve the now-mutated value
+    return value[1];
 }
+
+fn mutate(value: &mut [u32; 3]) {
+    // Dereference the borrow to mutate it
+    *value[1] = 17;
+}

examples/hello_world.reid

@@ -1,25 +1,9 @@
 import std::print;
 import std::from_str;
-import std::add_char;
-import std::set_char;
 import std::free_string;
-import std::new_string;
-import std::add_num_to_str;
-import std::concat_strings;
 
 fn main() {
-    let mut test = from_str("hello");
-
-    concat_strings(&mut test, from_str(" world"));
-
-    add_char(&mut test, '!');
-    add_char(&mut test, '\n');
-
-    add_num_to_str(&mut test, 175);
-    
-    print(test);
-
-    free_string(&test);
-
-    return;
-}
+    let message = from_str("hello world");
+    print(message);
+    free_string(&message);
+}

examples/hello_world_harder.reid

@@ -0,0 +1,25 @@
+import std::print;
+import std::from_str;
+import std::add_char;
+import std::set_char;
+import std::free_string;
+import std::new_string;
+import std::add_num_to_str;
+import std::concat_strings;
+
+fn main() {
+    let mut test = from_str("hello");
+
+    concat_strings(&mut test, from_str(" world"));
+
+    add_char(&mut test, '!');
+    add_char(&mut test, '\n');
+
+    add_num_to_str(&mut test, 175);
+    
+    print(test);
+
+    free_string(&test);
+
+    return;
+}

reid/tests/e2e.rs

@@ -101,6 +101,10 @@ fn hello_world_compiles_well() {
     test(include_str!("../../examples/hello_world.reid"), "test", None);
 }
 #[test]
+fn hello_world_harder_compiles_well() {
+    test(include_str!("../../examples/hello_world_harder.reid"), "test", None);
+}
+#[test]
 fn mutable_compiles_well() {
     test(include_str!("../../examples/mutable.reid"), "test", Some(21));
 }